Compare Products

2023 Toro GrandStand 40 in. Kawasaki FS541 15 hp
2023 Toro GrandStand 40 in. Kawasaki FS541 15 hp

Specs

General Information

Manufacturer
Toro
Toro
Model Year
2023
2023
Model
GrandStand 40 in. Kawasaki FS541 15 hp
GrandStand 40 in. Kawasaki FS541 15 hp
Model Code
74536
74536
Color
Red
Red

Body

Frame
Carrier - 3 x 1.5 in. (7.6 x 3.8 cm) x 12 ga.
Carrier - 3 x 1.5 in. (7.6 x 3.8 cm) x 12 ga.

Drivetrain

Drive System
Pumps (10 cc / rev)
Pumps (10 cc / rev)
Travel Speed Forward
8.0 mph (12.9 km/h)
8.0 mph (12.9 km/h)
Wheel Motors
10 cir
10 cir
Drive Tires
18 x 9.5 - 8 in. (46 x 24 - 20 cm)
18 x 9.5 - 8 in. (46 x 24 - 20 cm)
Steering Tires
Caster - 11 x 4 - 5 in. (28 x 10.2 - 12.7 cm) flat-free semi-pneumatic
Caster - 11 x 4 - 5 in. (28 x 10.2 - 12.7 cm) flat-free semi-pneumatic

Electrical

Hour Meter
Standard
Standard

Engine

Engine Make
Kawasaki®
Kawasaki®
Engine Model
FS541
FS541
Gross Horsepower

15 hp (11 kW)

The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAEJ2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

15 hp (11 kW)

The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAEJ2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

Displacement
541 cc
541 cc
Air Cleaner
Air Filter - Heavy-Duty Canister Air Cleaner
Air Filter - Heavy-Duty Canister Air Cleaner
Fuel Type
Gasoline
Gasoline
Fuel Capacity
7.8 gal. (29.5 l)
7.8 gal. (29.5 l)

Hydraulics

Hydraulic System
Fluid - Premium synthetic
Fluid - Premium synthetic

Measurements

Length
Box Dimensions - 77.25 in. (196.2 cm)
Box Dimensions - 77.25 in. (196.2 cm)
Width
Box Dimensions - 49 in. (124.5 cm)
Box Dimensions - 49 in. (124.5 cm)
Height
Box Dimensions - 42 in. (106.7 cm)
Box Dimensions - 42 in. (106.7 cm)
Cutting Width
40 in. (102 cm)
40 in. (102 cm)
Mowing Height Range
1 - 5 in. (2.5 - 12.7 cm in 6 mm) increments
1 - 5 in. (2.5 - 12.7 cm in 6 mm) increments

Operational

Steering
Controls - Twin lever
Controls - Twin lever
Deck Construction
Design - 7 ga. 40 in. (102 cm) TURBO FORCE® with bull-nose bumper
Design - 7 ga. 40 in. (102 cm) TURBO FORCE® with bull-nose bumper
Discharge
Chute - Rubber
Chute - Rubber
Spindles

Housing - 9.375 in. (23.8 cm) diameter cast iron

Bearings - Maintenance-free

Housing - 9.375 in. (23.8 cm) diameter cast iron

Bearings - Maintenance-free

Blades
Type - 0.204 in. (0.5 cm) heat-treated steel
Type - 0.204 in. (0.5 cm) heat-treated steel
Blade Tip Speed
18,500 ft. / min. (5,638 m. / min.)
18,500 ft. / min. (5,638 m. / min.)
PTO Clutch
Electromagnetic
Electromagnetic

Other

Includes
Comfort Platform - Foldable operator platform with suspension
Comfort Platform - Foldable operator platform with suspension

Features

Features

  • FATIGUE-REDUCING SUSPENSION: The revolutionary Flex-Ride operator platform suspension* keeps operators fresh, resulting in less fatigue and higher productivity throughout the day. Best of all, the suspension system is self-compensating for operators of different sizes.
  • 2-IN-1 VERSATILITY: In situations where the operator may want or need to walk, Toro's foldable operator platform instantly converts the GrandStand to a walk-behind. When it's time to ride, just lower it back down - saving time, money and trailer space by eliminating the need to switch from one mower to another.
  • STAND-ON MOWER PRODUCTIVITY: The ability to turn easily, get in and out of tight spaces, and quickly get on and off the mower to pick up debris or move obstacles all contribute to less time spent per property. The exceptional visibility of the GrandStand protects the operator, the mower and the property. The operator is better able to steer clear of obstacles, identify upcoming changes in terrain and easily pass beneath overhanging branches.
  • EXCLUSIVE TURBO FORCE DECK: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • THE INDUSTRY'S TOUGHEST SPINDLE ASSEMBLY: Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell.
  • TRACTION AND HANDLING: The wide stance and optimal weight balance of the GrandStand enhance hillside stability and control. Because there are no restrictions to limit operator motion, operators can shift weight as needed to further enhance the performance of the machine.
  • BIG ON FEATURES, NOT SIZE: The GrandStand conserves space to get more machines on your trailer or allows for a smaller trailer and a lighter load. And the unique, foldable operator platform makes the product even more compact for transport or storage. Some property owners have negative reactions to larger, heavier-looking mowers, and are concerned that their lawns may be damaged. With the sleeker Toro GrandStand, that problem is eliminated.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7 ga. bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 0.25 in. (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • HEAVY-DUTY MUFFLER GUARD: Heavy-duty, 7-gauge muffler guard protects muffler against damage.
  • FLAT-FREE, SEMI-NEUMATIC CASTER TIRES: Flat-free, semi-pneumatic caster tires
  • Exceptional visibility from the GrandStand protects the operator, the mower and the property. The operator is better able to steer clear of obstacles, and easily pass beneath branches.
  • Toro's foldable operator platform instantly converts the GrandStand to a walk-behind. It easily lowers back down when its time to ride – saving time, money and trailer space by eliminating the need to switch mowers.
  • Conserves space to get more machines on your trailer, or allows for a smaller trailer and lighter load.
  • With hefty cast iron spindles including maintenance free bearings plus only annual grease points, there will be less need for routine maintenance. That means less time spent off your mower and more time generating profits with it.

Features

  • FATIGUE-REDUCING SUSPENSION: The revolutionary Flex-Ride operator platform suspension* keeps operators fresh, resulting in less fatigue and higher productivity throughout the day. Best of all, the suspension system is self-compensating for operators of different sizes.
  • 2-IN-1 VERSATILITY: In situations where the operator may want or need to walk, Toro's foldable operator platform instantly converts the GrandStand to a walk-behind. When it's time to ride, just lower it back down - saving time, money and trailer space by eliminating the need to switch from one mower to another.
  • STAND-ON MOWER PRODUCTIVITY: The ability to turn easily, get in and out of tight spaces, and quickly get on and off the mower to pick up debris or move obstacles all contribute to less time spent per property. The exceptional visibility of the GrandStand protects the operator, the mower and the property. The operator is better able to steer clear of obstacles, identify upcoming changes in terrain and easily pass beneath overhanging branches.
  • EXCLUSIVE TURBO FORCE DECK: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
  • PATENTED ADJUSTABLE BAFFLE: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • THE INDUSTRY'S TOUGHEST SPINDLE ASSEMBLY: Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell.
  • TRACTION AND HANDLING: The wide stance and optimal weight balance of the GrandStand enhance hillside stability and control. Because there are no restrictions to limit operator motion, operators can shift weight as needed to further enhance the performance of the machine.
  • BIG ON FEATURES, NOT SIZE: The GrandStand conserves space to get more machines on your trailer or allows for a smaller trailer and a lighter load. And the unique, foldable operator platform makes the product even more compact for transport or storage. Some property owners have negative reactions to larger, heavier-looking mowers, and are concerned that their lawns may be damaged. With the sleeker Toro GrandStand, that problem is eliminated.
  • A FLAT CRISP CUT WITH PRECISION BLADES: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • SMARTER DESIGN IN A BULL-NOSE BUMPER: 7 ga. bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 0.25 in. (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • RUBBER DISCHARGE CHUTE: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • HEAVY-DUTY MUFFLER GUARD: Heavy-duty, 7-gauge muffler guard protects muffler against damage.
  • FLAT-FREE, SEMI-NEUMATIC CASTER TIRES: Flat-free, semi-pneumatic caster tires
  • Exceptional visibility from the GrandStand protects the operator, the mower and the property. The operator is better able to steer clear of obstacles, and easily pass beneath branches.
  • Toro's foldable operator platform instantly converts the GrandStand to a walk-behind. It easily lowers back down when its time to ride – saving time, money and trailer space by eliminating the need to switch mowers.
  • Conserves space to get more machines on your trailer, or allows for a smaller trailer and lighter load.
  • With hefty cast iron spindles including maintenance free bearings plus only annual grease points, there will be less need for routine maintenance. That means less time spent off your mower and more time generating profits with it.